easy wood projects
Took some additional images from the last stage, these include the broken tooth (near the bottom, 6th):
These images show the ground out front trunnion bracket (the welds have been ground down) - theres a small hairline gap in the inside corner - Im having it touched up this weekend as well as some slight voids.
The inside of the case isnt bad - not much rust at all, mostly at the bottom (expected). No weird cut-outs or anything - just some clean-up. Ive already banged out some edge dents that will be followed up with a light coat of body putty.
The base has ruts but mostly surface with little pitting - I think it will clean up well with the sandblasting - any rough spots Ill hit with body putty. There are two holes that were cut with the castors - Im not yet sure what to do about those. Welding to the cast iron seems excessive.
Once I have the trunnion assembly pulled apart Im starting on the motor rebuild - I may go ahead and take it apart so the commutator can be turned.
-- John
Do you find information about easy wood projects are you looking for? If not, below may help you find more information about the easy wood projects. Thank you for visiting, have a nice day.
0 komentar:
Posting Komentar